Do you want to link your Raspberry Pi with dump1090 to FlightAware?

If you are running an ADS-B receiver with dump1090 on a Raspberry Pi then you can install the PiAware package to transmit your ADS-B receiver data to FlightAware.

PiAware users can simultaneously use data from their Raspberry Pi running dump1090 and also send flight data to FlightAware via PiAware. Users that share data with FlightAware automatically qualify for a free upgrade to an Enterprise Account.

What is PiAware?

PiAware is a FlightAware client program that runs on a Raspberry Pi to securely transmit dump1090 ADS-B and Mode S data to FlightAware. PiAware is for people who are already running their own Raspberry Pi with an ADS-B receiver and dump1090.

It's fast and easy to get started.

Using the simple steps below, you can configure your Raspberry Pi to feed FlightAware. The process should take two to three minutes.

Already running PiAware?

View the PiAware upgrade page to update to the latest version.

1What's needed

You should already have a Raspberry Pi with Raspberry Pi OS installed and some basic familiarity with using it.

If you are new to using a Raspberry Pi or need to build a receiver from scratch, please see these instructions instead!

Requirements:

  • Raspberry Pi
  • Raspberry Pi OS Bookworm, Bullseye, or Buster installed
  • Internet Connection
  • Access to a command line shell on the Pi, either over the network or using an attached keyboard and display

2Install the latest OS updates and reboot

This will ensure that you have the latest OS updates before you install FlightAware packages.


sudo apt update
sudo apt full-upgrade
sudo reboot

3Download and Install PiAware

Download and install the FlightAware APT repository package, which tells your Pi's package manager (apt) how to find FlightAware's software packages in addition to the packages provided by Raspbian.


wget https://de.flightaware.com/adsb/piaware/files/packages/pool/piaware/f/flightaware-apt-repository/flightaware-apt-repository_1.2_all.deb
sudo dpkg -i flightaware-apt-repository_1.2_all.deb

Update your apt package sources and install PiAware. This will install all the required dependencies on your Raspberry Pi.

sudo apt update
sudo apt install piaware

Enable automatic and manual (web-based, via your request) PiAware software updates. These updates are disabled by default. To leave updates disabled, skip this step.

sudo piaware-config allow-auto-updates yes
sudo piaware-config allow-manual-updates yes

4Download and Install dump1090-fa

If you don't already have ADS-B decoder software such as dump1090-fa installed, then you can install FlightAware's version of dump1090 by executing the following command.


sudo apt install dump1090-fa

5Download and Install dump978-fa

Note: 978 MHz UAT is only present in the U.S. If you live outside the U.S, you can skip this step.


sudo apt install dump978-fa

For further instructions to configure your receiver for 978 UAT, go to our Erweiterte Konfiguration page.

6Reboot your Pi

Once you have finished installing and configuring the packages, reboot your Raspberry Pi to ensure that everything starts correctly.


sudo reboot

7Fordern Sie Ihren PiAware Client auf FlightAware.com an

Sie sollten ungefähr vier bis fünf Minuten während des Starts Ihres PiAware warten und können dann Ihren FlightAware Account mit ihrem PiAware Gerät verknüpfen, um von allen Vorteilen zu profitieren.

Fordern Sie Ihren PiAware Client auf FlightAware.com an

Wird Ihr Gerät nach 5 Minuten immer noch nicht als "in Anspruch genommen" angezeigt, starten Sie das Gerät neu. Sollte das Problem weiterhin bestehen, überprüfen Sie (gegebenenfalls) die WLAN-Einstellungen. Schafft dies keine Abhilfe, wenden Sie sich bitte an den Support unter: [email protected]. Überprüfen Sie Ihre Seite "Statistiken" (siehe folgender Link), um zu bestätigen, dass das Gerät "in Anspruch genommen" wurde.

8Ihre ADSB-Statistiken

  1. Sie finden Ihre ADS-B Statistiken unter: https://de.flightaware.com/adsb/stats
    • FlightAware beginnt unverzüglich mit der Bearbeitung Deiner Daten und zeigt Deine Statistiken innerhalb von 30 Minuten.
    • Statistics Page
    • oder klicken Sie nach der Anmeldung auf 'Mein ADS-B' in der Kopfzeile. Dieser Menüpunkt erscheint erst dann, wenn 30 Minuten lang Daten vom Standort aus gesendet wurden.
    • My ADS-B in the page header

  2. Konfigurieren Sie Ihren Standort und die Antennenhöhe auf Ihrer Seite "Statistiken", indem Sie das Zahnradsymbol rechts neben Ihrer Standortbezeichnung nutzen.

    • Bei der Multilateration (MLAT) wird die Position eines sendenden Flugzeuges anhand der bekannten Positionen der Empfängerstationen ermittelt.
    • Statistics page gear icon location

  3. Die FlightAware-Seite "Statistiken" zeigt auch die lokale IP-Adresse Ihres Gerätes an und stellt einen Link für die direkte Verbindung bereit. Sie finden dort auch einen Link zu SkyAware, einem Webportal, das Flüge, von denen der Empfänger Meldungen erhält, auf einer Karte darstellt.
  4. Statistics page SkyAware link location
    FlightAware PiAware: SkyAware ADS-B software web interface

Verwandte Links (PiAware, Raspberry Pi, dump1090, and more)

Anmelden

Haben Sie kein Konto? Jetzt (kostenlos) registrieren für kundenspezifische Funktionen, Flugbenachrichtigungen und vieles mehr!
Wussten Sie schon, dass die Flugverfolgung auf FlightAware durch Werbung finanziert wird?
Sie können uns dabei helfen, FlightAware weiterhin kostenlos anzubieten, indem Sie Werbung auf FlightAware.com zulassen. Wir engagieren uns dafür, dass unsere Werbung auch in Zukunft zweckmäßig und unaufdringlich ist und Sie beim Surfen nicht stört. Das Erstellen einer Positivliste für Anzeigen auf FlightAware geht schnell und unkompliziert. Alternativ können Sie sich auch für eines unserer Premium-Benutzerkonten entscheiden..
Schließen